Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG Midget and Sprite Technical - Fan belt
| Is a GCB 10863 a dynamo or alternator fan belt? Thanks |
| Jeremy Cogman |
| Jeremy I *think* a 10863 is a dynamo belt. Just checked my records and I'd tried both an 10863 and 10838 on my 1275 Frogeye with alternator. I ended up keeping the 10838 but note this is a 12V588F engine so I don't know if earlier 1275s have the same belt when changed to alternator. |
| Bill Bretherton |
This is from the Moss website. It looks like 863(mm) is for a dynamo. The 813mm version would be for an alternator due to the smaller pulley. I’m not sure what the 838 fits without looking up the chassis numbers.
|
| Dave O'Neill 2 |
| Dave, ISTR there were two alternator pulley sizes but I haven’t had chance to look it up at present. R. |
| richard b |
| Dave, the 838 fits my 1275/alternator setup but, as I said, the engine is a 12V588F. This corresponds with the Moss listing. The 813 is for later 12V engines according to Moss. Of course, this assumes a Lucas ACR pulley size. |
| Bill Bretherton |
| It could be my memory, but I am fairly sure the 813 is way too short, had one in stock for years and could never find and engine it fitted. |
| Paul Walbran |
| Thanks folks, I'll pass it on to my Dad, my Mum's car still has a dynamo. And I had no idea the last three digits were the length, thanks for that. |
| Jeremy Cogman |
This thread was discussed between 05/02/2023 and 06/02/2023
MG Midget and Sprite Technical index
This thread is from the archives. Join the live MG Midget and Sprite Technical BBS now