 
Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG Midget and Sprite Technical - Front Engine Mounts
| Has anyone bought any lately? I recall report of some supplies being too soft. | 
| Graeme Williams | 
| I thought they were too hard and causing vibration? | 
| Dave O'Neill 2 | 
| Can anyone suggest a supplier for "good quality" mounts? | 
| Graeme Williams | 
| As detailed in this thread, the ones I purchased were certainly too hard. http://www2.mg-cars.org.uk/cgi-bin/gen5?runprog=mgbbs&mode=archiveth&archiveyear=97_2016.dat&access=&subject=97&subjectar=97&source=T&thread=201512042259099308 I have just bought a pair from ebay [the seller ebay is in Italy] and they are certainly much softer. | 
| Doug Plumb | 
| We just got a report a few months back from a newbie about mounts being 2 hard... the 1st we have seen now there 2 soft.... i guess 3 bears dont all use the same tolit paper in the woods prop | 
| Prop and the Blackhole Midget | 
| Mine feel fine just fitted them a few months ago | 
| Onno K | 
This thread was discussed between 25/02/2016 and 27/02/2016
MG Midget and Sprite Technical index
This thread is from the archives. Join the live MG Midget and Sprite Technical BBS now