MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG Midget and Sprite Technical - RWA Hood recomendations

Hi all

My wife has a late 1275 and needs a new hood for it. Anyone have a recomendation for a good quality well fitting hood? Have seen adverts from Moss, Prestige etc.

Would the original have had a lighter interior colour? Do any of the replacement hoods have this as it would make the interior a lighter nicer place?

Thanks

Mark
Mark Turner

Don Trimmings (Don Hoods) in Birmingham are highly recommended!
Dave O'Neill2

Consider a zip out rear window. Not original, but far more comfortable if the weather gets warm.
Phil Burke

2 x phil

But i cant think of who the players are that make a zip out window

Robinson is good, thats what i have

Prestiage has lots of colors and types of materials from molehair to imitation plastic

Prop
Prop and the Blackhole Midget

Mark,
if Don Hoods still do their fitting service I'd recommend you consider it as they made a superb job on my previous Spridget

personally I'd only recommend vinyl for a car that's actually going to see some use for the ease of maintaining appearance, cleaning and proofing
Nigel Atkins

I fitted a dark green hood from Don Hoods. I was very pleased with the quality. They do quite a range of colours.

C Bintcliffe

Did you fit that Tenax fitting where the velcro usually sits or did Don Hoods supply with this?
P.J young

I bought a red vinyl hood from Don's Hoods with zip out rear window. I fitted the hood myself. Very very pleased with it.
In hot temps on the continent it is a wonderful feeling. Hood up, windows down, rear window open, so breezy.
Neil T

Easy to fit. The trick is getting a good hood without paying over the top for it.

I bought one(unknown origin) from ebay. Vinyl not as good as the one I took off, but not too bad.

Does anyone know what the Sussex hoods are like?

Wasn't the best type, the original stuff used by BMC?
Lawrence Slater

Ordered one from don trimmings on the 31 may still waiting, customer service needs a bit of attention keep emailing but just keep telling me it will be with you in 7 days , The longest 7 days i have ever known.
mark (1977 1500 Midget) Preston Lancs

This thread was discussed between 29/06/2012 and 01/07/2012

MG Midget and Sprite Technical index

This thread is from the archives. Join the live MG Midget and Sprite Technical BBS now