 
Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG Midget and Sprite Technical - Tining cover
| Anyone have a good 1275 timing cover? | 
| Richard Perry | 
| Richard, you may be after "original" but an alternative is one from a classic mini, which has the advantage of having the timing marks on the top, where you can see them! All you then need to do is remark the crank pulley. | 
| GuyW | 
| many thanks but I need the midget one with the chimney for breathing so don't think they do that one | 
| Richard Perry | 
| Plus add a catch tank for the oil mist I though i had a leaking timing cover, took along time, to figure out, but it was a warped front engine plate was warpped really bad... thing leaked oil like a sieve untill i figured it out | 
| 1 Paper | 
| Might have one, will check at the weekend for you. | 
| P Bentley | 
| http://www.ebay.co.uk/itm/MG-MIDGET-1275-TIMING-COVER-/232281847604?hash=item361513b734:g:jvIAAOSwax5Y1T4N Bit rusty, but do-able. Bernie. | 
| b higginson | 
| Richard, I have a timing cover, I should have grabbed a picture, but it doesn't have any timing 'teeth' on it. . . not sure why, it was in a bag of other long forgotten about bits. . . .let me know if this is any use to you | 
| P Bentley | 
| it doesn't matter if no timing teeth - can you email a pic to frogeye3@hotmail.co.uk many thanks Richard | 
| Richard Perry | 
This thread was discussed between 22/06/2017 and 28/06/2017
MG Midget and Sprite Technical index
This thread is from the archives. Join the live MG Midget and Sprite Technical BBS now