Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG Midget and Sprite Technical - Wheel Bearing success
| Hi guys, Had the dreaded front wheel bearing drone start last week. Racked to n/s/f. Still on the original bearings after 148,000 miles. But glad to say managed the job in about 45mins yesterday, peace is restored! Was a bit worried after hearing stories about poor fitment, but the ones I got seemed fine, one Timken and one SKF in the kit. |
| SR Smith 1 |
| great! would you mind naming the supplier? |
| David Smith |
| Echo that. Who supplied the kit? |
| Lawrence Slater |
| Sure, Came from here............. http://heritagecarparts.com/mg-midget-front-wheel-bearing-set-ghk1142-proper-factory-spec-part/ Not cheap, but fitted beautifully |
| SR Smith 1 |
| Ah, the "proper" ones then! |
| Graeme Williams |
| Yep, Absolutely spot on fitment wise Graeme. I'd rather pay a bit more for a quality part than 50% less for some lash up that doesn't fit as it should. |
| SR Smith 1 |
| They must have been supplied to them by Chris. Or, is this actually Chris, as these people claim --- "We have been re-engineering hard-to-find classic car parts for years now. Please get in touch if there's something which you think needs re-engineering. Our strengths are based on our in-house machining and production capabilities." Is this Chris, or have others finally caught on, and realise there's a good market in supplying the correct spec FWBs. Whatever, it's a good result, and soon Moss, Sussex, et al, will be supplying them too. |
| Lawrence Slater |
| Did no one know of these people? Found them fairly quickly in a google search. |
| SR Smith 1 |
| certain it's Chris. Any news on the clutch bearings? |
| aj robinson |
| The website is a bit shy on "location" and no further information in "contacts" but a telephone no on the site has an area code for Halstead or thereabouts which would be appropriate for Chris. |
| Graeme Williams |
| whois lookup comes up with Christopher Buckingham as the owner of the site |
| dominic clancy |
| It is Chris's people Glad they fitted right, nice innit ;) |
| Bill sdgpM |
This thread was discussed between 12/12/2015 and 13/12/2015
MG Midget and Sprite Technical index
This thread is from the archives. Join the live MG Midget and Sprite Technical BBS now