MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MG Y Type - Oil Pressure Line Leaks

Where can I get some of the small I.D. hose which makes the bulkhead connection for the copper tubing which runs from the engine to the oil pressure guage?
S.R. Barrow

Hi Scott

I had this problem a while ago - the pipe had gone totally pourous - I cannot remember but I think I went to my local hydraulic hose company in the finish and they had what I needed.

You should also look at your petrol hose - mine had also perished - both were originals! Cant complain at that for quality and longevity!

Paul
Paul Barrow

Scott - If you take Paul's suggestion, make sure that the hydraulic shop understands that the fitting at the ends of the hoses are a British Standard Pipe (Parallel) thread. They can usually salvage the original fittings if need be. Good luck - Dave
David DuBois

Fittings? My LHD Y hasn't any, just a small, original looking hose clip on each end. Looks like you insert a tool into the loop and turn it to tighten, or loosen.
My RHD car has the same rig, and it feels like two pieces of copper tubing connected by the hose.
Thank you
S.R.Barrow

Hi Scott

I think (without going outside to the workshop - its 3:08 am here)mine is just crimped on too from memory.

Anyone else?

Paul
Paul Barrow

Paul,
I think Dave was talking about the fittings on the tube at the gauge and at the engine, while I was preoccupied with the rubber piece!
Scott Barrow

That flex portion of the hose if it is like my YA is exactly the same as a TD. Moss have it as part #376-060
Sandy Sanders
conrad sanders

This thread was discussed between 16/10/2004 and 10/11/2004

MG MG Y Type index

This thread is from the archives. Join the live MG MG Y Type BBS now