MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG ZR ZS ZT Technical - BROADER APPEAL FOR MG ZT AND ZT-T

BROADER APPEAL FOR MG ZT AND ZT-T

MG announce today (July 18) a number of actions planned for the popular MG ZT and ZT-T models to further enhance appeal – the availability of a common rail diesel engine, standard fitment of a slightly more pliant suspension set-up, a sports suspension option, the introduction of an integral bootlid lip spoiler and a wider choice from the Monogram programme. The pliant suspension and Monogram enhancements are available with immediate effect, the diesel engine from mid August and the lip spoiler from the end of August.

MG ZT and ZT-T New Diesel Engine

To capitalise on the growing diesel market aided by lower CO2 ratings, the availability of a diesel engine will be introduced to the MG ZT and ZT-T ranges from mid August. The 2.0 litre engine uses the very latest common rail diesel technology, allowing finer atomisation resulting in more efficient combustion.

Appealing to the sports orientated motorist who requires high levels of fuel economy, the MG ZT/ZT-T diesels will enjoy extremely competitive levels of performance. The saloon is capable of 0-60mph in 11.0 secs, 30-50mph (4th gear) in 8.1 seconds and a top speed of 120mph. In terms of economy the ZT has an official Combined figure of 48.8mpg.

Details of the MG ZT and MG ZT-T diesel line-up, CO2 ratings and "on the road prices" are contained on the attachment.

MG ZT and ZT-T Sports Suspension

The current MG ZT and ZT-T suspension dynamics have been widely praised by sports car enthusiasts and journalists for their set up and responsive handling. In
order to further broaden the appeal of these vehicles to an even wider audience, a suspension set up with a slightly more pliant feel and an emphasis towards ride comfort will be introduced.

This is of particular importance amongst our key target markets of high mileage business users. The new MG suspension differs through a modification to the front and rear spring and damper assemblies. This suspension will still provide an exceptionally agile feel but with greater occupant comfort.

As there is anticipation that the newly developed suspension set up will prove very popular, it will be the standard condition on all MG ZT and ZT-Ts. The MG Sports Suspension set up will undoubtedly be favoured by performance driving enthusiasts and available as an option, priced at £175.

New ZT Saloon Bootlid Lip Spoiler

A new bootlid lip spoiler will now become standard fit on all entry level ZTs from August production. The new bootlid lip spoiler reduces rear lift by 40% and is almost comparable in performance to the ‘wing’ spoiler.

The current ‘wing’ spoiler will remain an integral part of the ‘Plus Pack’ and a £275 option for customers that wish to trade up from the new spoiler to the ‘wing’ spoiler on any entry level ZT. Conversely, for plus pack customers who prefer the smaller lip spoiler, this will be available as a no cost option.

Effectively all MG ZTs are now fitted with either spoiler, depending on customer preference.

Monogram Programme for Individuality

The Monogram programme is being offered to customers of new MG and Rover cars to meet a desire for individuality. It consists of a range of paint finish and trim combinations as well as technology features.

Twenty exclusive new colours are available to all new MG and Rover customers. They include the latest Chromactive, Kinetic and Supertallic paint finishes that give a dramatic colour shift even in low light conditions. Interiors can be trimmed in a wide selection of quality materials that include ‘Personal Line’ leather trim, Oxford Leather and Alcantara, in a spectrum of colours.

The Monogram initiative also extends to additional factory fitted options. Becker Pro Navigation and roof mounted DVD players are just a sample of the additions available for customers to individualise their cars.

Ann MG Writer

ROVER INTRODUCE A NEW TAX BEATING

TURBO-CHARGED 1.8-LITRE ENGINE FOR THE SUCCESSFUL 75

Rover is today (18 July) launching a new tax-beating turbo-charged Rover 75 to compete with the growing demand for compact-executive cars that combine tax-efficient CO2 ratings and the associated good fuel economy, with excellent performance and driveability. A new design of turbo-charger has been matched to the strong design characteristics of the K Series engine to produce the outstanding combination of 150Ps power, 215Nm of torque from 2100rpm and competitively low 193g/km CO2 emissions – ideal for the intellectual tax conscious motorist.

The new 1.8T models are available on Rover 75 Saloon and Tourer body styles with a range of trim specifications available from Classic to Connoisseur SE.

This addition to the engine range complements the 1.8, 2.0 V6, 2.5 V6 and the accomplished 2.0-litre common rail turbo-diesel – each offering class-leading refinement.

The Rover 75 1.8-litre turbo-charged 4-cylinder engine holds many advantages over the competition. Weighing in at just 100kg, the K Series’ lightweight construction provides exceptional levels of responsiveness and drive.

Available in showrooms from early August, the new 1.8T Saloon models will be priced from £18,295 for the Classic specification to the Connoisseur SE at £22,120.

Rover 75 1.8T – Power Unit in Detail

Rover engineers have tapped into previously hidden development potential to produce a new 150Ps turbo-charged version of the K Series 1.8-litre engine which
makes its debut in new versions of the award winning Rover 75 range. The Rover 75 1.8T models have been developed specifically to meet the growing demand for compact-executive cars that combine tax-efficient CO2 ratings (and the associated good fuel economy) with excellent performance and driveability.

The new 1.8T versions have a tax-beating CO2 rating of 193g/km, thus reducing the 2002/03 UK company car tax liability to 20% of list price plus lower running costs through enhanced fuel economy.

At the same time, the 1.8T performs well with good acceleration. 60mph passes from a standstill in 9.1 seconds and in gear performance in fourth gear between
30-50mph and 50-70mph in fourth gear can be achieved in 7.1 and 7.4 seconds, respectively. This ‘have your cake and eat it’ result follows a very intensive and carefully-judged engineering programme to produce the first ever turbo-charged production version of the lightweight K Series engine.

Background and Programme

For the ultimate in thermodynamic efficiency with low emissions, it was decided to apply the latest turbo-charging technology to the 1.8-litre, 4-cylinder K Series engine, which offered an excellent starting point of high efficiency and very low weight.

Packaging and pre-prototype engineering of the turbo-charger, intercooler and ducting installation was carried out swiftly and accurately via MG Rover Group’s advanced Electronic Product Definition (EPD) facility. The Rover 75 was one of the very first cars in the world to have been entirely designed on this type of dynamic real-time system, as there was already a fully digitalised ‘model’ of the Rover 75 from which to begin work.

The powerful ‘Virtual Engineering’ technology makes it possible to carry out analysis of the vehicle assembly process (via ‘E-build’) and dealer servicing operations months before a physical prototype exists. This reduces the traditional time-consuming development of the first prototypes, which were therefore close to optimum before physical testing began. Adding speed and efficiency to the programme were the company’s rapid prototyping facilities, such as laser-cured resin
modelling machines. Engine performance and economy was also fully simulated to optimise inlet, exhaust and turbo-charger geometry and performance, before committing to the manufacture of production tooling.

Once prototypes were built, MG Rover engineers had the pick of the world’s automotive testing facilities to assess the performance and reliability of the new Rover 75 1.8T. Hot climate work was carried out in Australia and USA, with the opposite extremes being covered in Canada. Specific engineering tests were completed using carefully selected chambers and test tracks in several more countries.

Under the Bonnet of the Rover 75 1.8T

For many years, turbo-charged petrol engines have tended to be compromised by the fact that turbo-charger design has inevitably been skewed in favour of the far more common diesel applications. Turbo-chargers designed mainly for the narrower and lower speed bands of diesels were difficult to optimise for petrol engine use, giving less satisfactory results either at low speed or at high speed, according to the size of turbo-charger chosen.

The Rover 75 1.8T, however, takes advantage of Garrett’s latest technology, using their new T100 turbine wheel design in a GT20 turbo-charger. Specifically designed to suit modern petrol engine characteristics, the T100 design contributes to the excellent driveability of the 1.8T under all speed and load conditions.

Associated with the turbo-charger installation are a number of important engineering changes. A special exhaust manifold in cast stainless steel can reliably withstand temperatures in the region of 1000 ˚C. Uprated pistons and connecting rods are

fitted, with the piston configured to give a 9.2:1 compression ratio. An uprated oil pump provides a 12% higher oil flow rate to meet the turbine bearing lubrication requirements, while the modified main bearing ladder casting has an inlet for oil return from the turbo-charger.

The throttle body is of course sealed to retain turbo-charger boost pressure, with a suitably revised manifold pressure sensor, and the fuel system modified, with a returnless feed controlled by a pressure demand regulator, plus new fuel injectors with higher maximum flow rates. Modifications to meet the extra cooling airflow demands of the engine and intercooler include a revised undertray for the engine compartment.

The philosophy behind the 1.8T was to use moderate boost pressure, so that the compression ratio could be kept fairly high, (at 9.2:1, compared with 10.5:1 on the normal 1.8 engine), for maximum efficiency at lower engine speeds when running off-boost. Emphasis has also been placed on providing strong and even torque throughout the normal driving range - the curve is virtually flat between 2100rpm and 4000rpm with 215Nm(159lbs ft) developed throughout.

Such torque allows the 1.8T to easily pull higher gearing, using the 3.9:1 final drive of the 2.5-litre models in place of the 4.4:1 unit used for the regular 1.8- and 2.0-litre versions. As a result, the 1.8T has vigorous in-gear acceleration, achieving
30-50mph in fourth gear in 7.1 seconds.

Through the gears, the 1.8T leads the competition with a 0-60mph dash achieved in 9.1 seconds. Despite the brisk performance, the efficiency and high gearing of the 1.8T allows enhanced economy, with an official Combined figure of 35.3mpg and Extra Urban of 46.3mpg again leading the class.

On the road, the 1.8T engine refinement and response characteristics harmonise well with the Rover 75 chassis, making the car well balanced and enjoyable to drive at any speed.

Model Availability and Specifications

The new 1.8T power unit is available from launch with a 5-speed manual transmission in both Saloon and Tourer body styles. A 5-speed automatic transmission will be made available with the 1.8T engine later in 2002.

Ann MG Writer

Copied and pasted from the news site - wonderful!
ZTT

Thanks Ann.

Good info!
J T Flint

Hi Jerry!
If you go to your own site, www.ilove@Jerry-mg.co.uk
and read the ZR section you will hear of a poor chap who just had his ZR "Fixed" by MG. The gearbox was u/s so the changed it...........They fitted the wrong box! with the wrong gear raitos!!!!!

You got to Laugh:)
Mega
Mega

www.horriblegreenwebsite@jerryflintstone.co.uk
Mike

"Mega & Mike" have you the same Mother?
Jeff Glover

Ignoring the irrelevant comments to this discussion of Mega & Mike(can you see why people get fed up with you?),am very pleased to hear about the turbo versions of the K series.Wonder if they will also be available on the ZS 120 which needs a bit of additional power nowadays ?
andrew K

This thread was discussed between 17/07/2002 and 18/07/2002

MG ZR ZS ZT Technical index

This thread is from the archives. Join the live MG ZR ZS ZT Technical BBS now