MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGA - Front wheel alignment

Seeking some expert advice. Mine's a twin cam, but I assume similar principles apply to all MGA. Just checked tracking and find 1.5mm toe out measured at wheel outer rim. Workshop Manual recommends parallel. Is this a material difference or within margin of error? Does it matter even if accurate? Should I bother adjusting it to zero?
Bruce.
B Mayo

Toe-out might make it a bit twitchy in a straight line.
Dave O'Neill 2

Set it dead on factory spec. That is excessive toe out. It will affect the handling.
Bill Spohn

On a car like this where zero toe in is specified, if I had to be off a little one way or the other I would allow a little toe in, but never a little toe out.
D mckellar

Personally I like about 1/16" or 3mm toe in.
A Bowie

Thanks all. Looks like I will be adjusting it this afternoon.
B Mayo

This thread was discussed between 15/04/2017 and 16/04/2017

MG MGA index

This thread is from the archives. Join the live MG MGA BBS now