 
Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG MGA - Splash plate
| The rear splash plates (behind the rear wheels) do not have any seals and there is a big gap at the top and a smaller gap on the outsides. Are they just a sort of stone guard ? | 
| Art Pearse | 
| Yes, sort of a stone guard. It protects tail light wiring and also provides a mounting point for the bottom edge of the fender. | 
| Barney Gaylord | 
| OK, so what is the hole for in the centre top of the plate? | 
| Art Pearse | 
| Probably used by a former owner so it could be hung for spray painting. Barry | 
| Barry Gannon | 
| Don't think so Barry, there are other holes that could be used for that. | 
| Art Pearse | 
| The top center hole is likely a factory production tooling hole, placed on a guide pin to hold alignment during forming of the part. | 
| Barney Gaylord | 
| OK, so I'm not missing any bits that might fix there! Thanks. | 
| Art Pearse | 
This thread was discussed between 28/04/2011 and 30/04/2011
MG MGA index
This thread is from the archives. Join the live MG MGA BBS now