MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGB GT V8 Factory Originals Technical - Wanted

Hi,

Im looking for a set of used rubber bumper springs, idealy in SouthWestern Ontarion. There was a gentleman from the kitchenere region who had a set as of last fall, but i have lost his contact information. The reason that im posting this in the conversion section is that im hoping that some of you who have converted to cb ride height will still have the springs lying around someplace that they'd be willing to sell them.

Also, about 6 months ago a post was made talking about mufflers that get welded inside exhaust pipes. Has anyone tried these and had success? Does anyone even remember these?

Thanks.

Alan.
Alan Raddatz

The bafflers for the pipes are from www.carchemistry.com . Ihave not tried them yet but plan to in the future on a 302 conversion.
Give them a call they are very helpfull.

I will have a set of springs but it won't be for a few months. They are still being used untill the ford rearend is complete.
Garret
garret

Alan,

Just finishing up a rear end swap with new lowering springs. Have a good set of RB springs available. I live in Conn., north west of Hartford. E-mail me.

Allan
Allan

Alan,
If Chatham is any closer to your neck of the woods, I have a good set of front & rear RB springs removed from my conversion.
G. E. Creswick

Alan,

If you're still looking for RB springs, I have a full set that came off my '79 roadster shell.

I've done the lowering on my project and would like to get rid of the springs.

If interested, let me know and I'm open to offers. I'm in Richmond, BC.

Cheers
Simon
Simon Austin

Alan,

I have a good, complete set of springs (front and back) from a 79 MGB. Email me if you are interested. I'm located in central Pennsylvania.

Rod
Rod H.

Guys, thanks a lot for the responses. I will be in touch when it comes time to do the suspension.

Alan.
Alan Raddatz

This thread was discussed between 20/03/2003 and 24/03/2003

MG MGB GT V8 Factory Originals Technical index

This thread is from the archives. Join the live MG MGB GT V8 Factory Originals Technical BBS now