MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGB Technical - GT door window rear track bracket

Started putting GT doors back together and found it difficult to get the rear track in proper alignment. The box of brackets I had were all the same size except for one which was longer. The longer one worked fine and now I need a left hand rear bracket for the other door. MOSS (USA) lists front and rear brackets for the roadster which fits only the rear of the GT. MOSS hasn't been able to give me a size so I am relunctant to order. If anybody has the door panels off of their roadster, could you verify which of the brackets shown on the attached image is used.

Thanks
Joe G

J. E. Guthrie

Here is a closer shot

J. E. Guthrie

I just finished replacing the door window rubbers on my '67 roadster which required the removal of the door windows. I believe you'll need the longer bracket, in your picture, to do the job. RAY
rjm RAY

On my 67BGT the brackets are as is your picture with measurements added. Hope this makes sense.

DK McNeill

Ok - I made a mistake in the brackets location and measurement. I will go and remeasure and create a new picture.
DK McNeill

OK - so here is the corrected version.

Also look at MOSS Europe page 105/6 for bracket info showing differences for roadster and GT
http://www.moss-europe.co.uk/Pdfs/MGB/MGB-10A_9_REBUILD.PDF

DK McNeill

Well I now see that Moss Europe has made the following change regarding the brackets in their latest catalog.
Note: These brackets are now manufactured with multiple fixing holes to suit front quarter light channel
and rear channel fixing.
The brackets are now MB70R and MB70L, channel lower front and rear RH and LH

My info was from their 2006 parts catalog which showed
HZA226/7 Bracket, rear channel RH/LH Roadster 2 screw fitting
HZA2066/7 Bracket,rear channel RH/LH GT 2 screw fitting
HZA678/9 Bracket, rear channel RH/LH Roadster 1 screw fitting
HZA2086/7 Bracket, rear channel RH/LH GT 1 screw fitting

Sorry for all the confusion
DK McNeill

Thanks guys
The bracket in the MOSS EUROPE catalog must be the universal bracket mentioned in a number of other threads. I don't know why MOSS USA does not provide that here. Ray indicates the larger bracket is on his roadster so I will order the part indicated for the GT at MOSS USA.

Joe G
J. E. Guthrie

This thread was discussed between 21/10/2010 and 22/10/2010

MG MGB Technical index

This thread is from the archives. Join the live MG MGB Technical BBS now