Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG MGB Technical - Heater wiring
| Now have the heater box out of the 1977 B roadster (see previous thread) but have a loose wire in the heater box itself. Any body know where this goes to I couldnt find any detail in th wiring diagram that i have. I thought the fan was working when i last used the heater but that's a while back and not sure if it was running at both speeds. Picture attached for info. Andy
|
| A Charman |
| Andy Thats not how they are meant to be and has been altered by someone as the 2 wires go direct into the motor as standard Ste |
| Ste Brown |
| The resistor is there to provide multiple speeds for the fan motor. I don't know if the 77 MGB came this way from the factory or if this is a PO modification. Cheers - Dave |
| David DuBois |
| Hi Andy, As David said. Check out this part of Paul Hunt's site http://www.mgb-stuff.org.uk/heater2.htm for internal wiring. Herb |
| Herb Adler |
| Thanks Herb, looks like the 3 wires are correct and one has come adrift from the resistor, probably when i was removing it from the car. |
| A Charman |
| Correct indeed, and factory for 77 and later models. I'd like to use that photo on my site if I may, attributed of course. |
| PaulH Solihull |
| The wiring diagram was usefull, the MGOC said they had no wiring diagram! |
| A Charman |
This thread was discussed between 18/01/2011 and 20/01/2011
MG MGB Technical index
This thread is from the archives. Join the live MG MGB Technical BBS now