MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGB Technical - overdrive plates

i need to change the gaskets on the 2 plates at the bottom of the o/d unit. 1 with the 6 screws for the filter and 1 with the 4 screws for the solenoid. is anything going to fall out when i take these plates off. this is on my MGC but assume its the same for mgb.
thanks bob.
bob taylor

D-type/3- synch or LH-type/4-synch? The following refers to the LH.

The oil when you remove the one with six :o) Not the solenoid plate. But if you have oil leaking from the solenoid plate it is the O-rings that are leaking, so change those as well.

The solenoid may drop out, or may need gentle tugging. It comprises the parts as in the attached, if the top cap comes off then watch out for the little ball that is inside. More info here http://www.mgb-stuff.org.uk/lhod.htm#5

paulh4

thanks paul
bob taylor

These might also help, John Twist videos -

104 MG Overdrive Repair Part 1 - https://www.youtube.com/watch?v=XPSgUeHAy8E

105 MG Overdrive Repair Part 2 - https://www.youtube.com/watch?v=LCqPu77EWEE
Nigel Atkins

thanks nigel
bob taylor

Sorry I forgot there was a part three, might as well have the full set - https://www.youtube.com/watch?v=FHw_o5y0HWE
Nigel Atkins

This thread was discussed on 28/09/2018

MG MGB Technical index

This thread is from the archives. Join the live MG MGB Technical BBS now