MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGF Technical - k&n APPOLLO FILTER...

Has anyone seen the new K&N appollo closed filter, there are some on ebay, universal fitting, is this what everyone is after?? I seem to remember a thread on ROB Bell thinking of making some kind of shield to keep the engine heat off the cone. i would presume that as they have a full cover over the cone,there must be a pipe which enters the cover , the other end could be feed down the air intake duct, then a lovely supply of cold air!!, am i correct or is it not this simple. mel..
m e johnson

Dont know about the Apollo Mel!....... but I want this one to match my exhaust.......

http://blueflameperformance.com/car/inforceair/index.asp

:o)

Mark.L

Looks FANTASTIC MARK ,seeing as a took your advice about the B F exhaust, this looks excellant. Have you got a price yet?? The one i,ve seen k&n, is at waxacar near us.I have yet to get a direct price from them. I presume this b f one is just the canister and not the cone filter as well. Will make some good conversation at the next meet,i,ll see what prices i can get, cheers mel.
m e johnson

Mel, I've enclose my K&N in an old Rover 820 airbox - so it sounds similar to what you are describing with respect to the 'Apollo'.

Is there a link anywhere?
Rob Bell

Looks nice, but the material (stainless steel apparently) conducts heat much more than carbon fibre or plastic...

Here's a picture of a K&N Apollo on a Focus ST :
http://img.photobucket.com/albums/v185/p44cmb/apollo2.jpg
Fabrice

Mel!.

Have no idea if the Blueflame is any good!,or what it costs (Doubtless expensive)....... and as Rob says, you would get the same benefit from enclosing a cone filter, or even fitting the extra air intake to your original airbox along with a K+N panel(This is what I have done).....

But the Blueflame would look good every time you opened your boot!! ;O)

Ps
Meet is same place/time next Thursday(8th)
Mark.L

Thanks all, this is the next upgrade i,m after doing. I,m not sure which one yet.I will sound the upgrade out with the next insurance company i go with ( due up in 7 days)the guy at mgf 10 never sent the quote as promised ,dispite filling in the form. Perhaps its on its way ,but i won,t be chasing it up. Will have a look at your site rob to see if you have any pics.cheers ..mel..
m e johnson

Thanks for the pic Fabrice, any thoughts anyone on weather it would be as easy to fit as the k&n which is specific to the mgf ? would you feed the inlet pipe down towards the air intake ducts on the mgf? Sorry to seem thick,but i was all for the k&n on robs web site, complete with instructions ( cheers ),but this would solve the hot air issue so i think this may be the one for me.With it being a universal item i don,t want to buy one if it is not going to fit. Last thought ,would you still get the induction noise when it is enclosed,.......thanks mel...
m e johnson

This thread was discussed between 29/11/2005 and 06/12/2005

MG MGF Technical index

This thread is from the archives. Join the live MG MGF Technical BBS now