Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG MGF Technical - Phoenix Exhausts
Anyone interested they are making a new batch in 6 weeks time. They have three versions available - round/rolled finishers, allen key finishers and a slashed/round/rolled finisher. 260, 285, 275 GBP respectively (plus VAT) only for pre 2000 models. contact Paul Benson on 01884 34777 Gaz |
Gaz R |
The Phoenix I bought off Paul is going quite well :-) One thing I've noticed is that it has quietened down gradually - I presume the MEMS has "adapted" to the different back pressure. It may be my imagination, but torque feels improved over the stock pipe (its hard to tell about peak power without a rolling road!) Neil. |
Neil |
>It may be my imagination, but torque feels improved over the stock pipe I'd definately say that was the case I found the engine much more responsive when the Phoenix was fitted to my F - just a shame there's not one for the TF. :( |
Paul Lathwell |
Hi all. Phoenix are in Devon. Junction 17 (Op Mc Donalds) M5. Take a trip and save money. I am waiting for a S/S heat shild, you may have seen them on other F's. A LOT cheaper than certan outlets. Paul... |
PAUL. HINDLE. |
That should read Junction 28! |
Phoenix man |
Sorry. Yes J 28. M5. Paul... |
PAUL. HINDLE. |
This thread was discussed between 06/08/2002 and 11/08/2002
MG MGF Technical index
This thread is from the archives. Join the live MG MGF Technical BBS now