MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGF Technical - Trophy brakes how to fit

All. I have a black piece of metal and I am unsure where it fits to the front discs. It looks like it is supposed to go between the pads and clip under the pins and over the pads but one end fits and the other misses the metal part of the pads. Hard to explain and I cannot look at the old brakes as I am converting. Any pictures would be helpful.
Steve Kemp

Is it a thin piece of metal shaped like the pads, if it is, it could be an anti rattle shim but if you are upgrading to Trophy brakes I would presume these are bigger and therefore your old one wont fit.
Chris

Chris, I am upgrading. It is a flatish looking piece of metal. It is not the same shape as the brakes
Steve Kemp

Steve, check your email
Chris

Chris, Nothing at yet. Probably the firewall is checking the mail.
Steve Kemp

Have sent it again
Chris

Received the mail thanks Chris.

Also a thanks to Mike Satur who sent some pictures of the clip.
Steve Kemp

This thread was discussed between 10/04/2003 and 11/04/2003

MG MGF Technical index

This thread is from the archives. Join the live MG MGF Technical BBS now