Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
|
MG TD TF 1500 - Bill's TC update
Got some parts in from Moss so I went to work on the carbs
![]() |
MG LaVerne |
Pretty nasty...as expected. Floats were glued down tight in the bottoms of the bowls.
![]() |
MG LaVerne |
One needle set screw was buggered pretty bad but I was able to get it out. This one wasn't coming out with a screw driver
![]() |
MG LaVerne |
Unable to get any small needle nose stuff in there I went against my better judgement and got out the dremmel and used a pointed stone to get a depression I could start a small drill bit into. drilled with the dremmel and ...oh the shame...used the easy out
![]() |
MG LaVerne |
Interesting needles in the carbs. One about the right length but with a tapered shoulder and a square tip. The other way to long (maybe MGB ?) . Two new ones on the left out of my stash I'll be using...after I find some set screws... May have some here in town from a friend who owes me. The ones I have are for the larger 1 1/2" and won't work.
![]() |
MG LaVerne |
Not as nice as Dave B's work but it should suffice.
![]() |
MG LaVerne |
TC's come with a mirror mounted to the drivers windscreen post. This one was awol and one of the screws sheared off
![]() |
MG LaVerne |
How to get it out? No way with an easy out..I'd screw it up for sure. So I welded a little bead on the backside and the welded a nut to that. Twisted off a half dozen nuts but finally got one to hold and screwed the remains on through.
![]() |
MG LaVerne |
Nice work LaVerne. Looking forward to your continued updates. The cleaning job you did on the carbs looks terrific. John |
John Brickell |
Pumps are off to Dave B for a rebuild...Dave please send me a cc of any correspondence you have with Bill. Shocks are off to Peter for rebuilding. Wheels are at the bead blasters and 5 new tires,tubes and liners have been ordered. 3 big boxes of parts from Moss and it's snowing outside again. should be working but having to do some pre surgery prep today...maybe get back at it Wed or Thur. ![]() |
MG LaVerne |
Should have been Dave D...duh...mind else where today I guess. |
MG LaVerne |
This thread was discussed on 03/02/2014
MG TD TF 1500 index
This thread is from the archives. Join this live forum now