MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG TD TF 1500 - Bud, A Photo Of Your Car Please

Bud, could you post a photo of your car? I know I've seen it before but never kept a photo. It's the color I'm interested in. PJ
Paul S Jennings

The color is Autumn Red from an early Sherwin-Williams formula. This image was photo-shopped by gordon lawson to remove my camera case from on to of the cowl. Bud

Bud Krueger

Thanks Bud, I really like the deep red color, looks real nice! Thanks again, PJ
Paul S Jennings

Bud, can you tell me a little about your badge bar? My TD came with holes in the splash apron that appear to be for the same type of bar. You can just see the right side hole in the attached pic. Thanks. Jud

J K Chapin

Jud, I see you too are a member of the far flung Whitworth Nut club. Very good. Like the long lost Bob it is world wide...
Tom Maine

Proudly displayed although I don't get to many meetings.
J K Chapin

Jud, see http://www.ttalk.info/Tech/BadgeBar.htm BTW, I have now put over 1,000 miles on my Whitworth Nut cap Bud
Bud Krueger

I too have not made to many meetings. Someday though
Tom Maine

Bud, thanks. Those holes are in a different location from mine but, still, I'm curious - Were you able to find a Runyon bar or did you make your own? Jud
J K Chapin

From the archives:
http://www2.mg-cars.org.uk/cgi-bin/or17?runprog=mgbbs&access=&mode=archiveth&subject=8&subjectar=8&thread=2004122000072927832
Yes, I did find an original Doretti bar. Bud
Bud Krueger

My Whitworth Nut cap has been to the Orkney Islands and through the Scottish highlands. Couldn't find any club meetings however. I did have a "wee dram" at the Glenfiddich and Glenlivit distilleries in honor of the Club.

Jim
James Neel

Oh Crap! We have meetings?
I dont think I can make many form Maine.

:)

Rod
Rod Jones

Rod,

I'll be in Brooklin in a couple of weeks, we could have a meeting if you insist. Maybe get Tom Lange to join us. ;-)

Jim
James Neel

Fyi all, one of our founding Whitworth Nuts members has a new shipment of those badges, even better than the first ones. If anyone is interested in one email me off line at efhask99 at gmail dot com and I'll pass it on.
Ed
efh Haskell

Good thought James.
Sorry to say my engine is missing the cam followers and pushrods at the moment. Waiting for them to come back for Delta Cams and Smith Bros respecfully.

Rod
Rod Jones

This thread was discussed between 23/08/2014 and 25/08/2014

MG TD TF 1500 index

This thread is from the archives. Join the live MG TD TF 1500 BBS now