Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
|
MG TD TF 1500 - Gas Cap Pins
Where can these pins be obtained? I need both. PJ![]() |
Paul S Jennings |
9Chrome RIV415 TubularRivet,ovalhd Secures gas cap and trigger(each),TD,TF 2 2 $1.95 fromtheframeup.com |
George Butz |
You can of course also use very small screws. |
Geoffrey M Baker |
Thanks George. I am afraid to look at what I might have there :-) |
Christopher Couper |
Thanks George, I'll contact them. PJ |
Paul S Jennings |
George, Are you sure of the part number? There is a RIV015, 3/32 1 inch pin, but no RIV415 number. PJ |
Paul S Jennings |
See pg.39 of the FTFU online catalog, look on the line just above "Doors". I have not personally seen or used them, but Doug lists as above. George |
George Butz |
Paul, I made one for my TF when I had to take off the gas cap to clean and seal the tank since I damaged the original when removing. The attached picture shows what I made and if you have trouble finding one, let me know and I'll make you one up. I polished the head and used a center punch to flare the end when I re-attached the cap to the tank. Regards, Peter ![]() |
PFY Yaskowski |
George, Thanks, I found them! Before I order a couple, I have to see what to include in the order, there's always something. Peter, Thank you for the offer, much appreciated, but as of now I'm going to order a couple from TFU. PJ |
Paul S Jennings |
This thread was discussed between 24/01/2015 and 25/01/2015
MG TD TF 1500 index
This thread is from the archives. Join the live MG TD TF 1500 BBS now