MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG TD TF 1500 - Horn mounting bracket needed

Not sure where to search for one of the horn brackets I have lost during a recent rebuild. Thinking one away with some newspapers under newly painted parts. Anyone have a source or an old set to sell? Thanks, Rich
Richard Olson

There is one on eBay just now.
They are handed and this is for a TD.
A bit expensive in my mind.

http://www.ebay.com/itm/MGTD-MG-TD-BRACKET-HORN-MOUNTING-LEFT-/191277608300?pt=Vintage_Car_Truck_Parts_Accessories&hash=item2c8908ad6c&vxp=mtr


Jim B.
JA Benjamin

Im in need of a right hhanded one. I may have a spare that ill use to create a file and cut some new ones. Not sure until I look at the part.
Vince
Vincent Piņa

Richard, If your looking for a pair for a TD, I have a pair SOMEWHERE! Let me look and see if I can find them, if I can I'll let you know. I'll look after dinner tonight. They won't be 22 bucks apiece either. PJ
Paul S Jennings

Hi Rich
I have several pairs of the mounts.

Gary
763-226-5789
gl krukoski

Richard, I looked in the most obvious places and their not there. I'll look tomorrow in other boxes of different series parts, which is probably where their at. I know I have a pair, as they aren't TF parts, their in another bunch of boxes. Just finding them might be a chore. Sorry. PJ
Paul S Jennings

Gary, thanks, actually what I'm missing is the piece that goes between the bracket and the horn, the one with rubber washers and a rubber insulator; I have the part of the bracket that is on e-bay. Let me know what you have available, please, I'm stuck with no way to connect the horn to the bracket at this point.
Thanks, Rich
Richard Olson

Richard,
I repaired that actual piece you are looking for on Friday as the metal on one side was broken clean off near the round spacers so I replaced it using the good side as a template to cut out a new piece. There was no rubber on there-the 3 spacers were steel. I do seem to recall the other side having had rubber though as I had to do the same repair quite a while ago.The metal appears to be two layers of thin sheet-but I just used one thicker one.
Regards
Declan
D Burns

Declan, I went through that a couple of years ago. It turns out that the thin sheet is actually some sort of spring steel. The mount provides some sort of vibration isolation. Bud
Bud Krueger

Hi Rich
I have that part also.
I recently acquired the parts from two different restores that have retired.
Many new, restored and used parts.

Gary
gl krukoski

Bud,
That's exactly what I was thinking
Declan
D Burns

Gary, I will definitely be calling you Monday. Thank you.
Richard Olson

This thread was discussed between 09/08/2014 and 10/08/2014

MG TD TF 1500 index

This thread is from the archives. Join the live MG TD TF 1500 BBS now