MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG TD TF 1500 - KPH Speedo Overlay

Hi

Searched but not found anything, has anyone done a KPH overlay for an early TD speedo. Alternatively is there a supplier?

thanks

Barry
B Bridgens

Hi Barry, is this what you are searching for?
Cheers, Hugh

H.D. Pite

Hi Hugh

Yes exactly, the one on the left.

Barry
B Bridgens

Hi Barry, I have, for sale, a dial face with a decal on it as shown in my picture. I do not know any supplier for these.
Cheers, Hugh
H.D. Pite

Hi Hugh

Sent an email

Barry
B Bridgens

Supplier in France:

http://www.ebay.de/itm/Fond-de-compteur-km-h-MG-TC-/221562779149?hash=item33962bb60d
Bela

There is a chap in Holland who makes dials. He is retired and is not into mass production and only sells at shows. He does both the ndished and flat versions and also has clocks.
His products are top!!
Regards
Declan

Declan Burns

Hi

Thanks Bela and Declan.

Barry
B Bridgens

Lew Palmer makes decals for the Triple M instruments. Maybe he can do T-Series as well?

Gord Clark
Rockburn, Qué.
Gord Clark

These are not decals they are complete re-manufactured dials.
I fitted it this morning. Using the two espresso spoons to pop off the needle.
The dial fit perfectly.
Regards
Declan

Declan Burns

Now fitted in the car.
Declan

Declan Burns

Declan - "Using the two espresso spoons to pop off the needle."

When I did that once and had the needle bounce off the ceiling ;-)
Cheers - Dave
DW DuBois

Dave,
It only jumped about 2 or 3 inches!!!.
Anybody need the old dial as I won't be changing back to MPH?

Regards
Declan
Declan Burns


Declan, I could use your old MPH dial. Please let me know if its available. Thanks, Rich
Richard Cameron

Rich,
You are welcome to have it if you cover the postage which will be 3.70 Euro.
Regards
Declan
Declan Burns



Great--- I sent you a message through your email address. Again Thanks
Richard Cameron

Gents,

After looking at clock repair tools on the web I heated a small screw driver and bent about 3/8 inch of the tip to 45 degrees. Then I cut a notch like a mini crowbar. Works great for removing the instrument needles. Saved a bunch of dollars.

Jim Haskins 1953 TD
J M Haskins

If the kph dials are custom made, it would be an easy way to adapt to a modified diff ratio w/o an extra speedo gearbox (if the odometer is not important)
rgds
Mike
Mike Fritsch

This thread was discussed between 09/08/2016 and 20/08/2016

MG TD TF 1500 index

This thread is from the archives. Join the live MG TD TF 1500 BBS now