MG-Cars.info
MG TD TF 1500 Panel manufacturers BBS discussion at MG-Cars.info
MG-Cars.info
Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
Parts
MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.
|
|
MG TD TF 1500 - Panel manufacturers
| Would someone be able to help me please? I believe there are at least two panel manuf. one in New Zealand and the other in Ballarat New South Wales, both are on this forum however I cannot recall their names. Appreciate any information on who they are. Thanks. John...Sydney |
| John Walton |
| John Here is one Ausie link; http://www.kas-kilmartin.com.au/MG%20Description%20List.htm There is also a guy local to me at Gloucester that manufactures panels, have to do some chasing to find his details. Graeme |
| G Evans |
| try archives 2014 Body Panel manufacturer |
| Rod Brayshaw |
| Graeme, you beat me to listing Kilmartin. I have purchased a set of front quarter panels from them and need to purchase a side-screen compartment. John, are you home tomorrow (Sat), I am currently at Miranda (about 5km away) Stuart |
| Stuart Duncan |
| John Here is the link to the guy that is in Gloucester, interesting he will be displaying at Bendigo Swap Meet. http://www.oldera.com.au/?x=0& Graeme |
| G Evans |
| Hi Stuart Yes I will be home. Call me on 0410531341. Look forward meeting with you. John |
| John Walton |
| Thank you all. Just the information I was after. John...Sydney |
| John Walton |
| John The sketch pattern of the TF glovebox internals bounced back to me in the mail this week because I addressed it incorrectly. Do you still have a need for them? |
| G Evans |
| Graeme Yes please it would be most helpful. John...Sydney |
| John Walton |
| What a dope I am for I had previously asked the same question. That's the trouble when one starts to age. Oh well. John...Sydney |
| John Walton |
| John I will ring tomorrow morning. Rod Brayshaw was being modest. He also sells panels and ships to Australia & elsewhere. stuart |
| Stuart Duncan |
| It is my understanding that Kilmartin is the best panel maker for our cars anywhere! Yes/No? PJ |
| Paul S Jennings |
| Yep! |
| P Hehir |
| And they're Aussies! |
| P Hehir |
| Stuart, The problem we encountered yesterday with the wiring of the horn has been resolved. The horn on the drivers side was defective causing the problem. I relaced it with another and all is good. John |
| John Walton |
| Seeing it's mainly Aussies here (OK 1 Kiwi) I am urgently looking for rear springs for my TC, any condition. Regards, Don TF4887 TC 7730 |
| D J Walker |
| Sorry Don can't help you. John...Sydney |
| John Walton |
| Here's one in the UK ... http://www.sportscarmetalworks.com/ Gord Clark Rockburn, Qué. |
| Gordon A Clark |
| G'day Don. Just spoke to Bruce at Sportsparts in Sydney. Doesn't have any in stock but he can get them in. Usual comment "They're not cheap".. Also called Sports Car Spares on the Central Coast. He will ring me back. If he can help I'll post the contact details. Good luck. Cheers Peter TD 5801 |
| P Hehir |
| Thanks Peter, I did try Sports Car Spares and you are right, they are expensive. It may be a last resort and I won't eat for a month! Regards, Don TF 4887 TC 7720 |
| D J Walker |
| The Hutson Motor Company. Ltd in the UK sells wood, sheet metal, up to complete bodies for TA thru TF. www.e-typeccars.co,uk I bought a complete TF body from them and it is perfect, even the doors fit better than factory bodies. Advertised in "Safety Fast!" Catalog online Don H. |
| Don Harmer |
| Don Try this fella he has heaps of TC bits he is off loading Ian Cowen Email: igcowen@onthenet.com.au You might get lucky Graeme |
| G Evans |
| Don Try this fella in the West, his add says he has springs. Colin 0409030163 Graeme |
| G Evans |
| Thanks a lot Graeme, I will try the email contact. The 'Colin' in the West I tried over a year ago with no results or return call. Regards, Don TF 4887 TC 7730 |
| D J Walker |
| Hi Graeme, the email to Ian Cowen came back 'undeliverable'. Do you have any alternative contact? Regards, Don TF 4887 TC 7730 |
| D J Walker |
| Don Pls check your emails, if I receive a reply I will forward it on. |
| G Evans |
| Don. Noel @ Sports Car Spares advised he can get them from England. They're $330 per side new plus whatever it costs to get them to you. Maybe they could be delivered direct to you to save a few quid. Dunno how that compares with Bruce's price. Anyway good luck. Peter TD 5801 |
| P Hehir |
| Thanks Peter, that's better than I've had quoted new. Regards, Don TF 4887 TC 7730 |
| D J Walker |
| Hi Graeme Many thanks for the glove box pattern received yesterday. John |
| John Walton |
| There is a Dutch chap, Jan Gerards, I met at the Houten MG parts market who makes Body tub panels and wooden parts for the TC, TD and TF. The quality of the parts on display was amazing and the pricing was good too. His email address is jangerards@hetnet.nl Tel 043-3061772 Regards Declan |
| D Burns |
This thread was discussed between 17/10/2014 and 27/10/2014
MG TD TF 1500 index
This thread is from the archives. Join the live MG TD TF 1500 BBS now