 
Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG TD TF 1500 - Recognize Front Wheel Cylinders?
| I just removed the front wheel cylinders for a brake job, and have never seen this type before, with the seal ON the bronze piston.  All 4 were well and truly stuck, so they seem to be no improvement over stock. Anyone recognize them? Tom Lange MGT Repair   | 
| t lange | 
| I have also this kind of cylinder on mine (originaly RHD from UK). I don't know if they are from the factory or after market. They stick equally. Laurent. | 
| LC Laurent31 | 
| The always-knowldegable Steve Baker in the UK tells me that these are made by C and C in Holland (hence the C C cast on the cylinders). Tom Lange MGT Repair | 
| t lange | 
| I have same type bought from Abingdon Spares years ago when no other new ones were available. I thought it was German? I'll look when I get home. George | 
| George Butz III | 
| The outer piston seal design a great idea, but the rubber/plastic part is really thin and cheesy on this one dated 7/03.  Proper rubber would have worked better.  I did note that front cylinders were between $75 and $80 EACH in late 90s/early 2000s! George   | 
| George Butz III | 
| Hi Tom, II have the same pistons in the rear cylinders! Regards Klaus | 
| Klaus Harthof | 
This thread was discussed between 19/10/2020 and 20/10/2020
MG TD TF 1500 index
This thread is from the archives. Join the live MG TD TF 1500 BBS now