MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG TD TF 1500 - REMOTE MASTER CYLINDER RESOVOIR

I am tryin to find a remote master cylinder reservoir kit for a TD,, I believe Declan made it ??

hanks.
Steve
SPW Wincze

Yes, he does, works great.

Peter
P G Gilvarry

I went to a junk yard and took one from a small car. It was held to firewall by one screw. Then I took the cap off the mastercylinder and installed a 90 degree barb. cconnect the two with appropriate hose and off you go.
No more than 8-10 dollars and you did it yourself.
Sanders

Same desire, always difficult to see and fill and now almost impossible due to back injury and weight, is there are kit with instructions to buy or was there a description, couldn't find in archives
JON LEVINE

Here are photos of my kits. I can also supply a coppper pipe version. The machined cap replaces the master cylinder filler cap. The plastic reservoir kit now comes with a stainless steel laser cut mounting bracket.
Regards
Declan




Declan Burns

But doesn't the wsm say not to fill above a certain point on mc? If so, wouldn't Declan's design violate that rule? Or is the rule meaningless?
Ed
efh Haskell

I have Declan's unit installed on my TF. It is one of the best mocifications I have done to my car. Much easier to maint the level of brake fluid.
Rick

Ed, I think the master cylinder was used with a remote reservoir in other applications. This would account for the unused tapping and plug at the front of the reservoir. I have a vague memory of this in vans and trucks.
But all my memories are now vague :-]
Ray TF 2884
Ray Lee

Ditto all the positive feedback about Declans reservoir kit for a TD.

Declan,

Tell us more about the new mounting bracket.
Do you have a picture of it?
Do you still use a longer threaded rod from the battery holder?

Mort
Mort Resnicoff

Mort,
Here is a photo of it. It has an 8mm hole which fits on the battery J-bolt just like the old bracket but it also has two smaller holes so it can be mounted elsewhere.

Regards
Declan

Declan Burns

Where can I find a kit for sale? Thanks, Tom
Thomas McNamara

Scroll up, or down. The seller is here.
P G Gilvarry

Just email Declan - declan_burns@web.de Bud
Bud Krueger

This thread was discussed between 07/05/2021 and 23/05/2021

MG TD TF 1500 index

This thread is from the archives. Join the live MG TD TF 1500 BBS now