MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG TD TF 1500 - Rocker Arm Specialists info?

A while back there were some recommendations here for this firm in Anderson, CA.

Has anyone had any good/bad recent experience with them?

Contact information?

Thanks
Mark Sherman

Mark A. Sherman

Mark, they are good people to deal with and deliver good work .

Gerard
Gerard Hengeveld


I have roller rocker arms in stock, as well as Roller cams & flat lifter cams.
I also recondition OEM rocker arms.
E mail me, if interested.
laf48@aol.com
Len Fanelli
914 420 8699
Len Fanelli

Rocker Arm Specialists is at 19841 Hirsch Ct., Anderson CA 96007-4910, Tel: 530 378-1075. They do great work, but check the order of the components when you get it back. Bud

WHOOPS! just checked Google for their URL. Looks as if the ownership has changed and is now a new organization called Rocker Arms Unlimited. http://www.rockerarms.com/
Bud
Bud Krueger

Same old, good guys, though. I use them all the time. They do have the annoying habit of replacing Whitworth lock nuts with metric, though... Ask them not to!

Tom
t lange

If you're not careful your lock nut may end up looking like this. Jud

J K Chapin

I've used them for T-Type rockers. Great work. In fact they had OEM rocker shafts on the shelf.
Steve S

Mark, please contact me when you get time.
Jim Merz

Mark - Another place to get the rocker arms refurbished is Delta Cam in Tacoma Washington - http://deltacam.com/ I have always had great service from them. The first time I went in there, I was thinking that I would have a lot of explaining of what I had and the fact that it was From an old MG. I set the cam down on the counter and from the other end of the counter, the owner looked over and said "British cam, if I am not mistaken it is the cam from the later TD." At that point, I knew that I was at the right place. Cheers - Dave
D W DuBois

Delta has done rockers, cams and lifters for me. Always happy with their work.
Bruce Cunha

Ditto for Delta. I've had my Sunbeam Alpine and my Morris cam, lifters and rockers reprofiled by them and they are first rate.
Kevin McLemore

This thread was discussed between 20/01/2015 and 22/01/2015

MG TD TF 1500 index

This thread is from the archives. Join the live MG TD TF 1500 BBS now