Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
|
MG TD TF 1500 - Starter field coil screw
In an effort to remove the field coils from my starter I destroyed one of the 4 short Phillips head screws that secure the coils to the case. Does anyone know where I might find a replacement? Or know the size/thread so I can search. Thanks |
Mark Butler |
Mark - No promise, but I may have some of those screws kicking around. E-mail me at SUfuelpumps@donobi.net and I'll check for you. Cheers - Dave |
D W DuBois |
Mark I think they are normal, countersunk BSF screws. I couldn't budge the ones in my old TD's starter but then saw a picture of the original tool for loosening and tightening them. I cut the blade off a large screwdriver and welded a nut on the shaft. I then fitted this into the chuck of my pedestal drill and used feed leaver to apply pressure to the screw whilst I turned it with a spanner on the nut. I was able to remove and replace them without issue. There is a picture of the correct tool on page N7 of the workshop manual. Jan T |
J Targosz |
May have one if Dave doesn't-let us know. Dan |
Dan Craig |
Thanks Dan. Could you post your email? |
Mark Butler |
Give this a shot Mark |
Dan Craig |
This thread was discussed between 06/07/2014 and 07/07/2014
MG TD TF 1500 index
This thread is from the archives. Join the live MG TD TF 1500 BBS now