Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG TD TF 1500 - Temperature gauge
| Can I install an under the dash new temperature gauge? If so how would I hook it up? |
| jfl JOHN |
| TC, TD, TF? Easy in a TF, there is an extra hole near existing connection. Peter |
| P G Gilvarry |
| My TD had an after market gauge installed under the dash (screwed into the wood frame behind the dash) because the PO had snipped off the tubing to the original dual gauge. I hated it because it interfered with shifting. I finally had nossinger restore the dual gauge and got rid of the d@~ned thing. Anyway, the capilliary tube from the aftermarket gauge just screwed into the radiator reservoir just like to original. Jud
![]() |
| J K Chapin |
| Sure. I believe all TD's have the radiator plug for the thermostat. I am unsure if there is an adapter for the thread of a modern gauge. That is probably the only issue you would run into. |
| Bruce Cunha |
For a more accurate reading during initial warm up, I relocated the capillary tube bulb to the area below the thermostat housing.
|
| John Quilter (TD8986) |
| My ‘50 TD came with a VDO gauge mounted in the footwell….not very convinient! I made an alu bracket and moved the gauge under the dash. Not a single problem with shifting… Jasper Sorry for the bad orientation of the pic…
|
| Jasper Nederhoed TD3966 |
This thread was discussed between 01/07/2021 and 08/07/2021
MG TD TF 1500 index
This thread is from the archives. Join the live MG TD TF 1500 BBS now