MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG TD TF 1500 - TF Back board nut plates

I reached a "red letter day" this morning as I finally finished the complete disassembly of the tub. Much wood rot and rust to look after. From this point everything done is to reassemble back onto the TF project:)
I did find something that I'm not sure of! On the back wooden plywood board on the interior are 8 nut plates, 2 up 2 Down pretty much in all 4 corners. What are these for? I've checked all the normal sources and don't seem to find a answer.
Many thanks
Rod Murray 54 TF
Rodney G Murray

The supports for the gas tank?
J K Barter

I don't think so as the are on the interior of the car!
Regards
Rod
Rodney G Murray

There are 8 t nuts to hold the tank supports I place and 4 more for the Side curtain box. Picture of mine as I took it apart.

Rick

In the attached picture, you can see the BOLTS that hold the gas tank supports on. (Bottom Frame) There are 8 as noted in the previous post.
In the top frame, if you look closely you can see the T-nuts that secure the BOLTS to the backer board.
They have a T shaped flange not a round flange.

This is a TD but I would expect the TF to be similar.

They are 1/4" BSF.

Jim B.

JA Benjamin

Jim, Rick and JK.... You are all correct ... I can now see the exterior marks where the tank supports were attached.
Many thanks for the comments and photos:)
Rod
Rodney G Murray

This thread was discussed on 10/09/2016

MG TD TF 1500 index

This thread is from the archives. Join the live MG TD TF 1500 BBS now